FCI Watermakers

Content on this page requires a newer version of Adobe Flash Player.

 
  • Overview
  • Features
  • Specs
  • Downloads

Purified Dock Water. No Problem.

 

The FCI Dockside Treatment System (DTS) is another FCI Watermakers innovation, specifically designed to treat dock water. The FCI DTS+ Series of water purifying units allow you to enjoy fresh drinking, cooking, and bath water from your dockside source. The compact, modular design allows the unit to be tucked away just about anywhere. These advanced systems include a GAC filter, and are optimized for extended membrane life with up to 70% recovery, which means less maintenance, lower operating costs and more enjoyment out on the water. The FCI DTS+ systems eliminate viruses, bacteria, and cysts. They also remove up to 99% of total dissolved solids (TDS), causing surfaces to dry without leaving water spots. Spend less time wiping down your vessel, and relish the benefits of spot-free wash-downs to extend the life of your vessel’s paint and wax finish. A FCI Dockside Treatment System encompasses all of the qualities and reliability you have come to know with FCI Watermakers.


FCI DTS+ systems come in three configurations: DTS+, the fully automatic DTS+Auto, and the performance enhanced DTS+Solo. The systems’ overall benefits are the same, but the system for you will depend on whether you have an existing FCI Aquamiser Plus or Max-Q+ on-board, or not. The DTS+ and DTS+Auto are installed in-line, using your existing watermaker pumps, and integrate seamlessly into the controls and remote displays. Enjoy crystal clear, purified water from your dockside source without compromising your sea water membranes. The DTS+Solo is a state-of-the-art system delivering up to 3000 GPD, putting it in a class of its own. These stand-alone units do not require additional pumps or a watermaker top operate, and include an additional sediment filter to ensure extended use with lower maintenance and costs.


Digital Remote DisplaysRemote Touch Screen Displays
Allows you to Start and Stop your unit and
monitor cirtical conditions and operations.
 
Aquamiser+ & 
Max-Q+

DTS+ and DTS+Auto are compatible
with Aquamiser+ and Max-Q+ Series

DTS+
  • Purified dock water for drinking and bathing with no equipment on the dock needed
  • Utilizes your currently installed watermaker pumps and control system without compromising your sea water membranes
  • Up to 70% recovery rate
  • Removes up to 99% of TDS
  • Removes viruses, bacteria, and cysts
  • Spot-free wash-down saves time, with no need to chamois-dry surfaces
  • Extends your vessel’s paint and wax life
  • Compact, space-saving design
  • Preserves your seawater R/O membranes
DTS+Auto
  • Fully automated
  • Integrates seamlessly with FCI V4 Controller
  • Purified dock water for drinking and bathing with no equipment on the dock needed
  • Utilizes your currently installed watermaker pumps and control system without compromising your sea water membranes
  • Up to 70% recovery rate
  • Removes up to 99% of TDS
  • Removes viruses, bacteria, and cysts
  • Spot-free wash-down saves time, with no need to chamois-dry surfaces
  • Extends your vessel’s paint and wax life
  • Compact, space-saving design
  • Preserves your seawater R/O membranes
DTS+Solo
  • Purified dock water for drinking, cooking, and bathing with no equipment on the dock needed
  • Pumps and motors included. No need for additional pumps or systems.
  • Up to 70% recovery rate
  • Removes up to 99% of TDS
  • Removes viruses, bacteria, and cysts
  • SSpot-free wash-down saves time, with no need to chamois-dry surfaces
  • Extends your vessel’s paint and wax life
  • Compact, space-saving design
  • Extremely low power consumption
  • Exceptionally low noise and vibration
  • Wall- or deck-mountable
Learn more about The FCI Advantage, and why FCI Watermakers should be the clear fresh water choice.
Municipal feed water conversion up to 1,000 PPM; Chlorine tolerance >0.1

Model Description
DTS+A-1800 For Aquamiser Plus integration up to 1800 GPD; Retro or at time of order
DTS+A-1200 For Aquamiser Plus integration up to 1200 GPD; Retro or at time of order
DTS+A-800 For Aquamiser Plus integration up to 800 GPD; Retro or at time of order
DTS+A-600 For Aquamiser Plus integration up to 600 GPD; Retro or at time of order
   
DTS+MQF-1850 For Max-Q+ Frame integration up to 1850 GPD; V4 Control Integration; Field retrofit
DTS+MQF-1850-A For Max-Q+ Frame integration up to 1850 GPD; V4 Interface
DTS+MQF-1800-R For Max-Q Frame integration up to 1850 GPD; V2/V3 Interface; Retrofit
DTS+MQF-1275 For Max-Q+ Frame integration up to 1275 GPD; V4 Control Integration; Field retrofit
DTS+MQF-1275-A For Max-Q+ Frame integration up to 1275 GPD; V4 Interface
DTS+MQF-1200-R For Max-Q Frame integration up to 1275 GPD; V2/V3 Interface; Retrofit
DTS+MQF-700 For Max-Q+ Frame integration up to 700 GPD; V4 Control Integration; Field retrofit
DTS+MQF-700-A For Max-Q+ Frame integration up to 700 GPD; V4 Interface
DTS+MQF-600-R For Max-Q Frame integration up to 700 GPD; V2/V3 Interface; Retrofit
   
DTS+MQM-1850 For Max-Q+ Modular integration up to 1850 GPD; V4 Control Integration; Field retrofit
DTS+MQM-1850-A For Max-Q+ Modular integration up to 1850 GPD; V4 Interface
DTS+MQM-1800-R For Max-Q Modular integration up to 1850 GPD; V2/V3 Interface; Retrofit
DTS+MQM-1275 For Max-Q+ Modular integration up to 1275 GPD; V4 Control Integration; Field retrofit
DTS+MQM-1275-A For Max-Q+ Modular integration up to 1275 GPD; V4 Interface
DTS+MQM-1200-R For Max-Q Modular integration up to 1275 GPD; V2/V3 Interface; Retrofit
DTS+MQM-700 For Max-Q+ Modular integration up to 700 GPD; V4 Control Integration; Field retrofit
DTS+MQM-700-A For Max-Q+ Modular integration up to 700 GPD; V4 Interface
DTS+MQM-600-R For Max-Q Modular integration up to 700 GPD; V2/V3 Interface; Retrofit
   
Model Description Voltage
DTS+Solo-2000 2000 GPD Unit, 1 Membrane Vessel 120/240, 50/60hz
DTS+Solo-3000 3000 GPD Unit, 2 Membrane Vessels 120/240, 50/60hz

 

DTS+ Auto Information Sheet       754kB
DTS+ Solo Information Sheet       960kB

Please contact us for parts details, schematics,
user manuals and installation materials.
Copyright © 2012 FCI Watermakers. All rights reserved.   Terms & Conditions  |  Privacy Policy  |  Sitemap