FCI Watermakers

Content on this page requires a newer version of Adobe Flash Player.

 
  • Overview
  • Features
  • Specs
  • Downloads

Neptune+ Is Taking You to New Depths
with Quality and Reliability.


Since its launch, the Neptune Series has been recognized for its high efficiency and extreme reliability. The Neptune+ Horizontal is the first of the series to be fitted with the latest FCI V4 controller technology, and a marine-grade, high resolution, full-color, 7-inch touch screen HMI panel. Add an Automated Pressure Control, and the Neptune+APC puts complete watermaking automation at your fingertips. Capacities range from 1275 to 9500 GPD, making the Neptune+ ideal for commercial vessels, island homes, oil platforms, hotels, or large yachts.

 

Touch Screen Controls

 

RELIABILITY AND COMPLETE AUTOMATION ARE AT YOUR FINGERTIPS. The FCI V4 controller boasts an intuitive interface allowing customization of your watermaker through advanced touch screen controls. Our monitors’ higher heat tolerance and system design allow it to work in the harshest environments. FCI touch screen controllers can be installed with confidence, because they are Bridge Classified for marine use with Type Approval Certifications from: ABS, GL, Lloyd’s Register EMEA, Det Norske Veritas, and Russian Maritime Register of Shipping. Rest assured, our displays will not interfere with other on-board electronics. 

Enjoy Fresh Water from anywhere
From service vessels to oil platforms, island resorts and other remote locations, FCI Neptune desalinators will provide fresh clean water for drinking, personal use or simply washing down equipment.

Sit back and relax
Whether you need an ice-cold refreshment while unwinding ondeck or freshening up below for a day onshore, FCI Watermakers systems are reliable and work effortlessly.

 

STANDARD FEATURES:
  • Advanced marine grade 7" high resolution touch screen controller
  • Monitors are Type Approval Certified for marine use by: ABS, GL, Lloyd’s Register Maritime Register of Shipping.
  • New NMEA 2000 compatible
  • Unique IP address for remote access
  • Built-in, on-screen troubleshooting
  • 316SS Low-pressure Pump with closed impeller design (producing 50% more pressure with the same horsepower)
A
  • 316SS HP Pump
  • Commercially designed to operate 24/7, 365 days per year
  • Pressure Vessels with 316SS pressure and product ports, stress-eliminating engineering
  • 80 sq. ft. of Commercial Pre-filtration
  • Conservatively rated to ensure performance under varying conditions
  • Wash-down duty motors (epoxy coated, neoprene gaskets)
  • Dual isolation mounts: 6 each on the pump and motor skid, and 6 on the main frame
  • One Year Warranty
OPTIONAL EQUIPMENT / ACCESSORIES:
  • Bridge classified 4.3” or 7” remote touch control station
  • pH neutralizer filter
  • Spare parts kits
  • Cruising kits
  • UV sterilizers
  • Feed water pressure regulators, relief valves and feed pump
  • Automated and manual Media Filters
  • Custom system designs
  • System soft start
7" and 4.3" Remote Displays The Most Advanced Control
System At Your Fingertips

7” and 4.3” marine-grade Remote Displays can be installed with confidence, because they are Bridge Certified and guaranteed to not interfere with other on-board electronics. The intuitive interface provides instant access to all system customization and automated features.
Fresh Water Flush

Fresh Water Flush
Is Always Included

While other manufacturers consider this as an add-on feature, we see it as a friendly guesture. Routine maintenance should come at no cost. It prolongs the life of your system and minimizes excessive repairs. With V4 Technology you can schedule unattended flushes as you see fit.

High Performance Motor
with 316SS Shafts
High Performance Motor
with 316SS Shafts

FCI’s washdown duty motor is epoxy coated with neoprene gaskets and uses 316SS shafts protect it from moisture, rot and rust. Competing brands use inferior general or industrial duty motors with lesser features, like painted housings, paper gaskets and standard steel shafts.
Learn more about The FCI Advantage, and why FCI Watermakers should be the clear fresh water choice.
  • Horizontal
  • Wall-Mount
  • Modular
FCI Watermakers are designed to be tolerant of changing water conditions, unlike competing systems where optimal water conditions are essential to achieving stated output. Your vessel travels around the world encountering waters that vary in both salinity and particulate, which may cause other systems to become inoperable or less productive. We have provided the following performance specifications under typical sea water conditions, and guarantee operation in most ocean environments.

TYPICAL SEA WATER CONDITIONS
25ºC / 77ºF, 32,500 PPM TDS, 820psi @ 60Hz

OUTPUT

model per day (gal / L) per hour m3 feed flow rate (GPM)
NH12263+ / NH12263+APC 1275 / 4827 53 / 201 5.00 5
NH18263+ / NH18263+APC 1850 / 7003 77 / 292 7.00 5
NH25263+ / NH25263+APC 2500 / 9464 104 / 394 9.00 8
NH31263+ / NH31263+APC 3100 / 11735 129 / 489 12.00 12
NH43263+ / NH43263+APC 4300 / 16277 179 / 678 16.00 12
NH55263+ / NH55263+APC 5500 / 20820 229 / 867 21.00 12
NH75263+ / NH75263+APC 7500 / 28391 313 / 1183 28.00 16
NH95263+ / NH95263+APC 9500 / 35961 396 / 1498 36.00 16

ELECTRICAL REQUIREMENTS
model hp kw VAC phase Hz
NH12263+ / NH12263+APC 3.0 2.98 220 / 380 / 460 3 50 / 60
NH18263+ / NH18263+APC 3.0 2.98 220 / 380 / 460 3 50 / 60
NH25263+ / NH25263+APC 5.0 4.47 220 / 380 / 460 3 50 / 60
NH31263+ / NH31263+APC 7.5 6.34 220 / 380 / 460 3 50 / 60
NH43263+ / NH43263+APC 7.5 6.34 220 / 380 / 460 3 50 / 60
NH55263+ / NH55263+APC 7.5 6.34 220 / 380 / 460 3 50 / 60
NH75263+ / NH75263+APC 10.0 8.2 220 / 380 / 460 3 50 / 60
NH95263+ / NH95263+APC 10.0 8.2 220 / 380 / 460 3 50 / 60

WEIGHT
model lbs / kg
NH12263+ / NH12263+APC 398 / 180
NH18263+ / NH18263+APC 410 / 186
NH25263+ / NH25263+APC 416 / 187
NH31263+ / NH31263+APC 421 / 191
NH43263+ / NH43263+APC 471 / 214
NH55263+ / NH55263+APC 521 / 236
NH75263+ / NH75263+APC 655 / 297
NH95263+ / NH95263+APC 724 / 328

FCI Watermakers are designed to be tolerant of changing water conditions, unlike competing systems where optimal water conditions are essential to achieving stated output. Your vessel travels around the world encountering waters that vary in both salinity and particulate, which may cause other systems to become inoperable or less productive. We have provided the following performance specifications under typical sea water conditions, and guarantee operation in most ocean environments.

TYPICAL SEA WATER CONDITIONS
25ºC / 77ºF, 32,500 PPM TDS, 820psi @ 60Hz

OUTPUT

model per day (gal / L) per hour m3 feed flow rate (GPM)
NWM31263S 3100 / 11730 129 / 489 11.70 12
NWM43263S 4300 / 16271 179 / 678 16.20 12
NWM55263S 5500 / 20812 229 / 867 20.80 12

ELECTRICAL REQUIREMENTS
model hp kw VAC phase Hz
NWM31263S 7.5 6.48 220 / 380 3 50 / 60
NWM43263S 7.5 6.48 220 / 380 3 50 / 60
NWM55263S 7.5 6.48 220 / 380 3 50 / 60

WEIGHT
model lbs / kg
NWM31263S 400 / 181
NWM43263S 420 / 190
NWM55263S 440 / 200

FCI Watermakers are designed to be tolerant of changing water conditions, unlike competing systems where optimal water conditions are essential to achieving stated output. Your vessel travels around the world encountering waters that vary in both salinity and particulate, which may cause other systems to become inoperable or less productive. We have provided the following performance specifications under typical sea water conditions, and guarantee operation in most ocean environments.

TYPICAL SEA WATER CONDITIONS
25ºC / 77ºF, 32,500 PPM TDS, 820psi @ 60Hz

OUTPUT

model per day (gal / L) per hour m3 feed flow rate (GPM)
NM12263S 1200 / 4541 50 / 189 4.50 5
NM18263S 1800 / 6811 75 / 284 6.80 5
NM24263S 2400 / 9081 100 / 378 9.00 8
NM31263S 3100 / 11730 129 / 489 11.70 12
NM43263S 4300 / 16271 179 / 678 16.20 12
NM55263S 5500 / 20812 229 / 867 20.80 12

ELECTRICAL REQUIREMENTS
model hp kw VAC phase Hz
NM12263S 3.0 3.05 220 / 380 3 50 / 60
NM18263S 3.0 3.05 220 / 380 3 50 / 60
NM24263S 5.0 4.58 220 / 380 3 50 / 60
NM31263S 7.5 6.48 220 / 380 3 50 / 60
NM43263S 7.5 6.48 220 / 380 3 50 / 60
NM55263S 7.5 6.48 220 / 380 3 50 / 60

WEIGHT
model lbs / kg
NM12263S 300 / 136
NM18263S 315 / 143
NM24263S 340 / 154
NM31263S 370 / 168
NM43263S 390 / 177
NM55263S 410 / 186



Neptune+ Horizontal Information Sheet       1M
Neptune Wall-Mount Information Sheet        650K
Neptune Modular Information Sheet       720K

Please contact us for parts details, schematics,
user manuals and installation materials.
Copyright © 2012 FCI Watermakers. All rights reserved.   Terms & Conditions  |  Privacy Policy  |  Sitemap