 |
|
|
|
| |
- Overview
- Features
- Downloads
Trusted
Ingenuity. Exclusive Technology.
FCI’s Universal Reverse Osmosis Controller technology
pioneered remote marine water maker control over a
decade ago. Today, UROC-3G continues to be the smartest
solution and the most advanced marine water maker controller
on the market today, offering the most system programming
and operating features. While UROC was once reserved
for high-output reverse osmosis units, FCI has set
another standard by integrating this exclusive technology
into our most popular marine water makers, from the
Max-Q Series to the commercial Neptune, Poseidon and
Titan Series.
|
 |
Watersmart
Intelligence Does The Work For You
One-touch startup and customization. Automatic audio and visual alerts. Finger-tip
data and an onscreen help menu. UROC enables you to instantly install, run and
modify your system to meet your minute-by-minute needs. It’s so easy and reliable
to navigate, you’ll think your entire water maker consists of just a few buttons
on your control panel. |
 |
PRIME
screen:
When the system is started, this screen indicates the low-pressure pump is running,
displays system voltage, low pressure, reject rate and feed water TDS. |
 |
INITIATION
screen:
When all operation parameters are in line, the high-pressure pump engages and
the screen will display system voltage, high and low pressure, reject GPM and
production rate. |
 |
RUN
TIME screen:
Push the Run Time button and instantly get current run time, total system hours
and the number of gallons made. |
|
|
 |
Reliable
Sure-Touch Display Operation
Tactile feedback from FCI’s marine water maker
control panel eliminates operator error and provides
automatic programming with at-a-glance monitoring.
The tried and true technology and digital displays
are resilient to all boating conditions, unlike
touchscreens that potentially fail in high-temperature
climates or engine rooms. |
|
CAPABILITIES:
- Over current protection and monitoring
- Pretreat lock-out onland-based systems
- Pump sequence times
- PPM divert point
- Remote display enabled with view-only part
of display or remote feature
- Amount of gallons made or run time
- Schedule unattended fresh water flushes by
designating flush time and intervals that
are suitable for your needs.
- Alarm volume and backlight level
- ANSI Terminal Emulator access
- All flow units, pressures and temperatures
can be read in English or metric units
|
DIGITAL
DISPLAY READINGS:
- Inlet TDS, water temperature
- Low and high pressure
- Product and brine flow rates
- Total water produced each use
- Total hours run each use and for the life
of the system
- Tank level control condition
- On-screen scrolling hints
SYSTEM ALERTS:
- Low- and high-pressure fault
- Low quality product water
- Production beyond rated capacity
- Over current condition
|
|
|
 |
Convenient Remote Operation
FCI’s marine water maker controller gives you the ability
to program, customize, monitor and operate your system
from a remote display up to 4,000 feet away or from
a personal computer via FCI software or ANSI Terminal
Emulators. UROC also easily interfaces with the ship’s
onboard computers so all functions can be monitored
from central command. |
Schedule Unattended
Fresh Water Flushes
With UROC you can program your marine water maker to
automatically stage-start the pumps for load considerations,
prime itself and begin to make water. The technology
even allows for the amount of gallons produced or run-time
limits. |
| Learn
more about The
FCI Advantage, and why FCI Watermakers should be
the clear fresh water choice. |
|
|
|
 |
Copyright © 2010 FCI Watermakers. All rights
reserved. |
|
